T6PA720

Current Rating 720 Ampere
Phases Three Phase
Firing Mode Phase Angle
Input Voltage 80-600 Vac
Output Voltage     0-600** Vac
Control Signal  (0-10v) (0-5v) (4-20ma) (5KΩ)
 

**Maximum Output Voltage limited by Input Voltage

 

    

Quantum SCR Phase Angle SCR are optimized for but not limited to the following constant resistance elements/heaters/loads.

If you don't see your application listed please look at our SCR selection guide to help make an informed decision.

Quantum SCR Phase Angle Features
Phase Angle	Temperature and Current protection.	Easy front panel Soft-Start and Max adjustments
1-25 second Soft-Start	Easy access, built-in on-board fuses.	LED error and status indicators
Automatic Phase, Voltage and Frequency detection	Automatic Reset and Buffer

Phase Angle SCR are used for resistive elements and offer a greater range of applications. They have an infinite resolution allowing for fine control of quickly changing loads like lamps. There is a higher potential for RF or harmonics but this rarely shows up in applications. Soft starts make this easy on your elements avoiding rapid changes in state greatly increasing longevity.

Use any controller like Watlow and Omega to control your SCR

Our SCR is a direct replacement for any other make SCR, like Omega, Watlow, Johnson and Chromolox

This SCR controls all three hot legs.