S4ZC45
Current Rating 45 Ampere
Phases Single Phase
Firing Mode Zero Crossing
Input Voltage 80-480 Vac
Output Voltage 0-480** Vac
Control Signal (0-10v) (0-5v) (4-20ma) (5KΩ)
**Maximum Output Voltage limited by Input Voltage
Quantum SCR Zero Crossing SCR are optimized for but not limited to the following constant resistance elements/heaters/loads.
| Immersion heaters, Medium wave infrared, most all ceramic and Cartridge heaters, Wire/Coil Heaters including Nichrome. |
If you don't see your application listed please look at our SCR selection guide to help make an informed decision.
| Features | |
|
|
|
|
|
|
|
|
Zero Crossing, also known as burst mode firing are used with resistive elements such as Ni-chrome and other wire heater elements , but can not be used with inductive loads like a transformer or with fast changing elements like lamps and molybdenum, silicon or graphite elements. Zero Crossing has no harmonics or RF noise, but is low resolution and limited in its applications.
Use any controller like Watlow and Omega to control your SCR
Our SCR is a direct replacement for any other make SCR, like Omega, Watlow, Johnson and Chromolox
This is a single phase unit and controls one hot leg.
 |
 |
 |
 |
 |
 |
